Clement Monstar Dump Trailers
Supplementing the industry-standard Clement ScrapStar
For more than 50 years, professional haulers have looked to Clement for profitable solutions to their hauling problems. At 40 feet in length with an 89-cubic yard capacity, Clement’s MonStar is the largest dump trailer built, and a fine supplement to the industry-standard Clement ScrapStar. Haulers looking for strength and maximum payload in a high-cube trailer can count on 1/4-inch, AR450 plate steel in the main body; yet Clement has reduced trailer weight by utilizing a longitudinal-free trailer design. Other features include 102-inch sides, a barn door tailgate, plus an inverted cylinder for trouble-free operation. Haulers who need to supplement their workhorse ScrapStars should consider the stable, high-cube, super-strong MonStar half-round.
 
Above: MonStar’s mud flaps are attached to the super-strong barn door tailgate that swings out of the way during dumping. The rear light are also protected in a recessed light box, out of the way when the trailer is dumped Left: With wide-range draft arms and “102-inch axles, MonStar has surprising stability. See for yourself. As MonStar is raised, the load’s center of gravity get lowered, so that by the time the trailer iscompletely elevated, the rear bumper is only inches from the ground, maximizing stability.
SPECIFICATIONS
1/4-inch AR450 steel body and tailgate, 3/16” headboard
40 foot inside length 102 -inch sides for 89 cubic yards
Barn door gate
Mudflaps attached to the tailgate
Rear fenders of aluminum tread plate
2 speed legs attached to draft arms
Wide angle stabilizer arms
Combination break away/non break/away hoist shaft
Dumps with wheels on the ground through 41 degrees
Inverted 85-280T hydraulic cylinder
50,000# center point suspension
3/4 inch wall trunnion tube
25,000# axles, 102-inch wide track
Same size inner and outer bearings
Hub-piloted wheels
8.25 x 24.5 10 hole 11R24.5 radial tires
Outboard drums
Weight 20,100#
WABCO ABS brake system-2S-1M
Acrylic urethane enamel paint
|
Extra Value, AR450 steel
Super strong AR450 steel stands up to the toughest jobs. With AR450, Clement gives you an industry-leading strength-to-weight ratio.
Extra Value, a firm foundation
Building a trailer is a lot like building a house. Put as much strength possible in the foundation and the structure will be strong and it will last! With every trailer we start with 25,000-lb., 102-inch wide track axles, with parallel spindles and common inner and outer bearings that greatly increase both bearing and axle life. A heavy-duty 50,000-lb. Center- point suspension is another Clement stanard, or if the buyer prefers, 50,000-lb. Air ride can be specified. Hub-piloted wheels have no inner nuts and all nuts have right-hand threads, plus there are only 10 nuts instead of the usual 20. This reduces both maintenance time and cost. None of our competition has a stronger foundation than the one that’s standard on every Clement trailer, and few even come close.
Extra Value, inverted cylinder
With an inverted cylinder, there’s no doghouse, which means a free flow of material. An inverted cylinder has no ledges to collect dirt, water and ice, so the cylinder packing remains clean with no dirt pulled into the system. In an inverted cylinder, oil lays on the seals when the trailer is not in use, keeping the seals lubricated to prevent dry-out and cracking. To add extra value, the cylinder is stabil-ized with a rubber bumper, materially reducing the wear on the trunnion pins. Exclusive on Clement!
Standard Side Height
YDS Side Hgt. O/A Hgt.(48” KP) Weight
83 96” 12’11” 20,300#
Optional Side Heights
89 102” 13’5” 20,709#
77 90” 12’05” 19,674#
71 84” 11’11” 19,156#
Click Here for Brochure
|
(630) 739-4330
Comments on this entry are closed.